Jump to content
Corsair Community

Corsair link, 24 led stripe and gtx1070


Mark War
 Share

Recommended Posts

Hello, I have 2 questions regarding icue:

1_I have an asus gtx1070 is there a plugin to add the led of this card directly to icue?

2_I bought led strips with 24 leds per strip, in icue if a single strip only 12 leds light up, and to make a single strip work correctly I have to tell the commander pro that 3 led strips are connected to the channel, to make 2 go strips I have to set it to 5, further strips don't work.

Is there any way to increase the quantity of leds present in a single strip in the software?

Link to comment
Share on other sites

1) No, there is not.

2) Again, no, there is not. The configuration of iCUE is for Corsair products. Using other products is possible but you'll need to configure iCUE with the appropriate number/type of devices for the number of LEDs that you have. Do not go over about 60 LEDs (2.2A) powered by a single port. The Fan Hub has it's own power so it can be used for more LEDs on a single channel though the configuration limits are the same. 24 LEDs strips of 24 LEDs each would be a big problem.

Link to comment
Share on other sites

 Share

×
×
  • Create New...