Jump to content
Corsair Community

Corsair iCUE 220t


michigreppi
 Share

Recommended Posts

Hello everyone, i'm planning on building my first pc. I was thinking about getting the iCUE 220t case with a sapphire nitro+ rx 5700xt which is 306mm long. I've read the case's specification which say that the maximum lenght is 300 mm with a radiator. I wont be putting a radiator in my build, would this graphic card fit in the case?
Link to comment
Share on other sites

Yes, even with fans installed in the front.

 

You stated your graphics card is 306mm long. Case spec says 300mm max with radiator in front of case.

 

That is figuring a 25mm thick fan with 25-30mm thick radiator so 55-60mm total thickness for radiator\fan.

 

So only fans in front of case should give you about 25mm clearance with your graphics card.

Link to comment
Share on other sites

  • 5 weeks later...
Hi, michigreppi. Would like to know if you have built the pc yet and whether the nitro+ fits without a radiator but with the 3 fans installed cuz im looking to build the same pc as well and need some confirmation to relieve me of my concerns
Link to comment
Share on other sites

 Share

×
×
  • Create New...