Jump to content
Corsair Community

help big problems


tinak757

Recommended Posts

i have 2 sticks of cmx512-3200c2 on a gigabyte gak8ns motherboard .i cant get it to boot at latency 2.5 or lower has to be like 3.0 or above .isnt this low lantecy memory?irealy need it to be able to run at 2.0.i have the newest bios on my board.tryied older bios as well.and ideas is this meory wrong for this board and will they exchange it for memory that will work on it?
Link to comment
Share on other sites

  • Corsair Employee
Please use the latest bios and the timings for these modules with an AMD platform should be Cass 2.5-3-3-6 and I would set the Dim Over Voltage Control to +.2 volts as well. But you might try testing the modules one at a time to be sure.
Link to comment
Share on other sites

sady i wanted ram that can run at a latency of 2. so im out of luck with this memeory my old kingston value ram did and it was only ddr 2700 but overclcokedlike hect and did a lower latency..i do have the latest bios .and ran memtest got most errors on test 6.are there any options?
Link to comment
Share on other sites

  • Corsair Employee

Can you test the modules in another system? And I have no problem replacing the modules if you want to try that.

Please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it!

Link to comment
Share on other sites

i dont have a os on my other pc. i guess i can use a ubd disk and run some test on it..my guess is this meory dont like nforce chips on some boards and sadly thats the pc i put on it.if its replaced with same memory .im guessing ill have same issues.how ever im far froma expert
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...