Jump to content
Corsair Community

New Build, 7 QLs with HydroX Water Blocks


Recommended Posts

Hey folks,

I've been flipping through the forums for help with my current build and I'd like to share what I've decided to do and make sure it won't cause any issues. This is the first complicated Corsair setup I've done and I don't want to damage anything.

My setup is going to include 7x QL 120mms, Commander Pro, LED Kit, XC7 Block, and XG7 Block. I'll have the Node Core to connect all the fan RGB to. I plan on daisy chaining the water blocks together to the Commander Pro. To connect the 1 extra fan I'll be using the splitters I've found from the forums

 

RGB splitter Here: https://www.ebay.com/itm/Corsair-RGB-LED-Fan-Splitter-Cable/372525759121?hash=item56bc43fa91:g:ME0AAOSwkJNcZOIp

 

PWM splitter Here: https://www.amazon.com/dp/B01DV1Z0Z4/?coliid=I1UW1O6CXBNAUN&colid=3SAP929EB554C&psc=1&ref_=lv_ov_lig_dp_it

 

Side note: I do have a spare Lighting Node Pro and another Node Core available if needed, was hoping the splitters will suffice to keep case clutter down.

 

 

I've attached an image of how I think it should all work. Any input would be great. Thanks!

929513891_CorsairSetup.thumb.JPG.a63be1349d3247e614623bc74deb3f87.JPG

Link to comment
Share on other sites

 Share

×
×
  • Create New...