redmarine84 Posted March 29, 2005 Share Posted March 29, 2005 Hello, and first of all sorry for my bad english, I'm Italian :D: My PC it's: Cpu AMD Athlon Xp 3200+ (2200Mhz) Mobo Asus A7V600-X 30 Gb HD Maxtor Eide Sound Blaster Audigy 2 Platinum Ati Radeon 9600 Pro And my last present, 1*of Twinx1024-3200C2PT (2*512) If I Set these timings 2.5-3-3-6 and memory speed 400, the system not boot. If Set the same settings but memory speed 333, all works fine.... It's strange....my mobo support DDR400... RamGuy help me!! :(: Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted March 29, 2005 Corsair Employees Share Posted March 29, 2005 Can you tell me the bios settings you have set for both CPU and memory and any performance settings that you may have set? Link to comment Share on other sites More sharing options...
redmarine84 Posted March 29, 2005 Author Share Posted March 29, 2005 My performance settings are: Memory Frequency: 333 Mhz (266Mhz and 400 mhz are available, 266 works, 400 crash) Sdram Cas Latency: 2.5 T Sdram Ras To Cas Delay: 3T Sdram Ras Precharge Delay: 3T Sdram Active Precharge Delay: 6T Sdram 1T Command Control: Enabled Sdram Bank Interleave: 4 Bank Cpu Frequency Multiple: 11.0X Cpu External Frequency: 200/33 Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted March 29, 2005 Corsair Employees Share Posted March 29, 2005 With this MB if you install more than one module you may have to run them at DDR333. But I would test the modules one at a time with http://www.memtest.org and if they both pass please try slots 1-3 or 2-3 and see if they will run at DDR400 one up first. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.