Jump to content
Corsair Community

K70 RBG MK2 F1 and keypad characters not working anymore.


Albatar
 Share

Recommended Posts

Hi,

 

I've bought a K70 RBG MK2 in april 2019 and since 1 month my F1 key, my num lock key and / * - + Enter keys (the ones on the keypad) don't respond anymore, i've tried to reset my keyboard and updated the firmware, they still don't work anymore, i haven't changed anything before that, however i've noticed that my keyboard sometimes light up by itself when my computer is off.

 

Anything i could try to fix that ?

Edited by Albatar
Link to comment
Share on other sites

See below. There are numerous threads with various titles discussing the issue. Try clearing out your Actions Library.

 

https://forum.corsair.com/v3/showthread.php?t=191832

 

 

The keyboard light up when off/sleep mode is unrelated. Your BIOS/MB has a setting to provide power or not to the USB ports when in this state. If you bump the desk, hit a key, etc., the MB sees that as something that needs power and provides. You can disable this in the BIOS, but that will also prevent charging devices when the PC is in sleep/off. Otherwise if you trigger the light show, pull the keyboard plugs out from the USB slots until the next time you have to use it.

Link to comment
Share on other sites

See below. There are numerous threads with various titles discussing the issue. Try clearing out your Actions Library.

 

https://forum.corsair.com/v3/showthread.php?t=191832

 

 

The keyboard light up when off/sleep mode is unrelated. Your BIOS/MB has a setting to provide power or not to the USB ports when in this state. If you bump the desk, hit a key, etc., the MB sees that as something that needs power and provides. You can disable this in the BIOS, but that will also prevent charging devices when the PC is in sleep/off. Otherwise if you trigger the light show, pull the keyboard plugs out from the USB slots until the next time you have to use it.

 

Thanks for your answer, i've cleared all the actions, but the problem hasn't been fixed, i'm going to try to install the 3.21 frimware.

Link to comment
Share on other sites

The numpad keys + Enter are not normally affected, but there doesn't seem to be a solid rule on how it reacts. It is possible you have a different issue, but the timings of your problem coincides with the launch of the error in iCUE 3.22. If the problem still exists in 3.21, then we are looking at something else.
Link to comment
Share on other sites

The numpad keys + Enter are not normally affected, but there doesn't seem to be a solid rule on how it reacts. It is possible you have a different issue, but the timings of your problem coincides with the launch of the error in iCUE 3.22. If the problem still exists in 3.21, then we are looking at something else.

 

I've just installed the 3.21 and the problem is still here, my keys still don't respond.

Link to comment
Share on other sites

OK, then we are looking for something else. Go to the link below and you can try a soft reset. However, I am not expecting a change and I think you need to do the hard reset. For that, you need to contact Corsair through the Ticket Support System in the header above. Probably will take them a few days to respond.

 

https://help.corsair.com/hc/en-us/articles/360025465031-How-to-Reset-your-keyboard

Link to comment
Share on other sites

OK, then we are looking for something else. Go to the link below and you can try a soft reset. However, I am not expecting a change and I think you need to do the hard reset. For that, you need to contact Corsair through the Ticket Support System in the header above. Probably will take them a few days to respond.

 

https://help.corsair.com/hc/en-us/articles/360025465031-How-to-Reset-your-keyboard

 

Okay thanks, i'll check that when i'll be home tonight.

Link to comment
Share on other sites

OK, then we are looking for something else. Go to the link below and you can try a soft reset. However, I am not expecting a change and I think you need to do the hard reset. For that, you need to contact Corsair through the Ticket Support System in the header above. Probably will take them a few days to respond.

 

https://help.corsair.com/hc/en-us/articles/360025465031-How-to-Reset-your-keyboard

 

I've tried the soft reset, but the problem is still here, so i'm good to try the hard reset.

 

However after the soft reset my keyboard was typing / * - + by itself then stopped to do so.

 

Thanks for the help C-attack.

Edited by Albatar
Link to comment
Share on other sites

 Share

×
×
  • Create New...