Jump to content
Corsair Community

memory errors with 3200 512MB module


JeffersM

Recommended Posts

I had purchased a Value Select 1 GB Mem module kit (VS1GBKIT400) (2 X 512MB modules) and am getting memory errors in one of the modules when I run Windows Memory Diagnostic. Errors are mostly WINVC (with cache on). The memory settings are:

Max Memclock: BIOS:Auto Actual:200MHz

1T/2T Memory timing BIOS:Auto Actual:1T

CAS# latency (Tel) BIOS:Auto Actual:2.5

RAS to CAS delay (Trcd) BIOS:Auto Actual:3

Min RAS# active timer (Tras) BIOS:Auto Actual:8

Row precharge Time (Trp) BIOS:Auto Actual:3

Memory Voltage BIOS:Auto Actual:not displayed in POST

 

Main board used: MSI K8N NEO Platinum, socket 754

Chipset:nVidia nForce 3 250Gb

Processor: AMD Athalon 64 3000+

running all default settings, no over clocking

 

I only get the errors with 1 of the modules or if I use the 2 together. The other module is OK and works in any of the mem slots. The problem module gives errors in any slot. When I try a pair of Transcend TS64MLD64V4F3, there are no errors.

Link to comment
Share on other sites

  • Corsair Employees
Please try and set the Dim Voltage to 2.7 Volts and see if that will solve the problem, if not please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it!
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...