PhreakeVE Posted March 28, 2005 Share Posted March 28, 2005 I ran MemTest on this module and after 1 test it came up with a little over 40 errors. Here are the specs of my system and the memory module: Corsair XMC512 - 3200C2 XMS3202V2.2 0322086 XMS3200 512MB 400Mhz CL2 System: Intel I865PERL System Board (latest BIOS) 2 x 160GB Seagate SATA Drives (RAID ARRAY) NvIdia GeForce 6800 GTS (256MB) 2 x 512MB Corsair XMC512 Modules (1 works fine, the other pulls errors) 1 Antec PSU 500W As stated above ran MemTest on both modules 1 works fine with no errors and the other comes up with at least 40 errors after the first test. I let it run overnight and it came up with hundreds of errors. Please issue and RMA. Thank you! Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted March 28, 2005 Corsair Employees Share Posted March 28, 2005 Please set the Dim Voltage to 2.7 Volts if you have that option and set the timings to the following and test the suspect module with http://www.memtest.org. Dim Voltage to 2.7x Volts Resulting Frequency: 200 MHz SDRAM CAS Latency: 2.5T SDRAM RAS to CAS Delay (tRCD): 3T SDRAM Row Precharge (tRP): 3T SDRAM Active to Precharge Delay (tRAS): 6T If you still get errors, then I would suggest we replace both modules so they match. Please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.