apetters Posted March 27, 2005 Share Posted March 27, 2005 When I put bot modules my motherboard only recognize one of them!!!, so, instead of having 512 Mb I only see 256 Mb. WHAT CAN I DO? My configuration is: Asus k8vse deluxe AMD Semprom 3100+ Ati radeom 9800 pro Link to comment Share on other sites More sharing options...
Wired Posted March 27, 2005 Share Posted March 27, 2005 Test one stick at a time in the same slot, see how they show up. If they both show up fine, then there's probably a bad slot. Link to comment Share on other sites More sharing options...
leeghoofd Posted March 27, 2005 Share Posted March 27, 2005 Did you also try a bios update to 1005 the latest version ? what voltage and settings are you running the dimms at ? Like Wired said try to boot with each time one of the two in the rig. Memtest them and see if one of them is faulty otherwise it could be the mobo which indeed has a bad dimm slot or some incompatability with your ram. Link to comment Share on other sites More sharing options...
apetters Posted March 27, 2005 Author Share Posted March 27, 2005 Test one stick at a time in the same slot, see how they show up. If they both show up fine, then there's probably a bad slot. I've tried that test (one stick at a time) and both sticks are fine. And there isn't any bad slot because also i've test to put one of the sticks in every slot and they all work with that single stick. So my problem is that I can't make my motherboard recognize them together. When I put the both she one recognize one of them and my computer work only whith 256 Mb of RAM. Link to comment Share on other sites More sharing options...
leeghoofd Posted March 28, 2005 Share Posted March 28, 2005 What are the other components in your rig, how powerfull is your PSU ? did you flash the bios to 1005 ? What about the settings in the bios ( Dimm voltage, ...) Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted March 29, 2005 Corsair Employees Share Posted March 29, 2005 What bios version do you have installed? The latest is Ver. 1.006 Beta 5. And what slots do you have the modules in? I would suggest 1-3 or 2-3 and set the Dim Voltage to 2.7 Volts. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.