Jump to content
Corsair Community

iCUE LL 120 Fan control Issues


cheolieces
 Share

Recommended Posts

I have 8x LL120s. 2 are on the H100i RGB Platinum. The other 6 are on the Commander Pro. In iCUE (latest version) I go to the Pump and I can set the fan profiles with the presets. If I set to quiet the fans are 700-800 rpm. However if I go to the ones on the commander pro (latest firmware) I set the fans to quiet and they spend at 1470-1525 rpm. Setting to extreme on the commander pro and I get 1575-1675 rpm. What is going on?
Link to comment
Share on other sites

Hey, when you set your fans to Quiet on the Commander Pro, they are using the CPU temperature to calculate the RPM. The H100i Platinum fans will use the coolant temperature to determine RPM. Essentially, the coolant temperature will be lower, more stable, and an overall better sensor for you to set your fans to. So I would recommend to create a custom performance curve under the Commander Pro, assign the sensor to the Platinum Cooler sensor, and then you can also find the buttons for preset Quiet curve.
Link to comment
Share on other sites

 Share

×
×
  • Create New...