turquato Posted October 25, 2019 Share Posted October 25, 2019 (edited) Hi, I've recently bought and built my pc with the following parts. (Brand New) Processor: Ryzen 5 2600 Motherboard: Asus ROG Strix B450-F Gaming Memory: Corsair Vengeance Pro RGB (CMW16GX4M2C3000C15) Power Supply: Seasonic M12II 620Watts PSU (Used from previous build) SSD: Kingston SSD Now V300 240GB (Sata) GPU: MSI Gaming X RX580 8GB The part in question is the Memory, specifically, its ability to be controlled via ASUS Aura Software. CMW16GX4M2C3000C15 is nowhere to be found under this compatibility list https://help.corsair.com/hc/en-us/articles/360030465392-AMD-RYZEN-2000-3000-SERIES-Memory-Compatibility-List- from Corsair. Also, according to Asus' compatibility list https://dlcdnets.asus.com/pub/ASUS/mb/SocketAM4/ROG_STRIX_B450_F_GAMING/Memory-QVL-For-AMD-Ryzen-2000-Series-Processors.pdf?_ga=2.122510541.735162067.1571875881-1070335959.1568967824 the same memory is not supported either. However, based on this updated list from Asus https://dlcdnets.asus.com/pub/ASUS/mb/SocketAM4/ROG_STRIX_B450_F_GAMING/Memory-QVL-For-AMD-Ryzen-2000-Series-Processors.pdf?_ga=2.122510541.735162067.1571875881-1070335959.1568967824 the memory modules are supported but only for the 3rd Gen Ryzen Processors. I have updated the motherboard to the latest bios. Installed the latest Asus Aura Software, Corsair iCue and Corsair Aura Sync plug-in. I can control the Motherboard & Memory LEDs using their respective softwares but Asus Aura still does not detect my memory modules to control the RGB LEDs of the Corsair Vengeance RGB Pro (CMW16GX4M2C3000C15). Would like to know if anyone has experienced this and how to enable Aura Sync between Asus & Corsair. Edited October 25, 2019 by turquato specified issue to LED controls via Asus Aura Link to comment Share on other sites More sharing options...
chidy Posted October 25, 2019 Share Posted October 25, 2019 Do you have the latest version of Aura? Latest is 1.07.71. After you install the plugin go to Aura and click the refresh button and it should find your ram. Icue needs to be opened in order for Aura to control your RGB PRO Link to comment Share on other sites More sharing options...
Corsair Employee Corsair CJ Posted September 1, 2020 Corsair Employee Share Posted September 1, 2020 Do you have the latest version of Aura? Latest is 1.07.71. After you install the plugin go to Aura and click the refresh button and it should find your ram. Icue needs to be opened in order for Aura to control your RGB PRO This is correct. You need to ensure that Aura is up to date and iCUE is running in the background. Link to comment Share on other sites More sharing options...
Recommended Posts