Jump to content
Corsair Community

My first build


Jsuh1025
 Share

Recommended Posts

Hi everyone, I purchased an icue220T case along with the h1001 rgb plat AIO cooler. the case comes with the lightning node core. i plan on plugging in the 2 fans from the AIO cooler to the node. The case also comes with 3 rgb fans in the front. Upon unboxing the case, the node has 3 wires connected to it which are the 3 fans in the front... there is also 3 wires that are not conencted... they are 3 pin connectors which are from the 3 front fans as well... do i have the connect those 3 wires on the motherboard or are they not needed?

 

thanks in advancece for your help

Link to comment
Share on other sites

They connect to the motherboard to control the fan motor/fan speed. The ones that are connected are for the RGB only.

 

Check out the RGB FAQ linked in my signature.

 

Thank you... i dont have any 3 pin on my mobo.. is it ok to plug into the 4 pin ones by lining up the "click" connector? and lastly, the rgb fans on my h100i rgb aio, should i plug those into the node or just connect them into the wires of the aio... im sorry for the questions and hope i dont frustrate you.. just new to this and tryint o build my first pc.. thank you

Link to comment
Share on other sites

 Share

×
×
  • Create New...