Jump to content
Corsair Community

Sequential lighting on 7+ fans


MikeG BE
 Share

Recommended Posts

The lighting link effects that have a sequential nature will automatically go in device order through the system. However, for doing your own manual waves/ripples, you are working with two different devices, each with their own timings and effect setting. How you split the 7+ fans over two RGB controllers will affect the timings you need to create and it is not an easy task. A lot of it comes down to case layout. 2 extra fans on the bottom you never see could have their own RGB Hub and do their own thing. When you start getting into 4 + 3 and trying to program the delays to match, it gets harder. If you go this route, do yourself a favor and make even numbers -- even if your true fan count is not. So if you have 9 fans (5 on Ch1, 4 on Ch2), tell iCUE Ch2 is 5 HD/LL/ML fans like channel 1. It will invisibly generate the effect to keep both in sync without the need for complex manual timings.
Link to comment
Share on other sites

 Share

×
×
  • Create New...