hahler2 Posted August 4, 2019 Posted August 4, 2019 I'm in the process of planning out a loop. I want to use the XD5 reservoir and am trying to figure out if there's enough room in the front of my case for a 60mm radiator, fans in push, and the pump/res. But I can't find dimensions for the XD5 anywhere. Can anyone help with this please?
c-attack Posted August 4, 2019 Posted August 4, 2019 I am looking for this. I know I have seen one, but need to track it down.
skyteam78 Posted August 5, 2019 Posted August 5, 2019 (edited) According to Scan.co.uk the dimensions are 83 x 188 x 83 mm (WxHxD). I can validate it later today if you wish by physical measurement. Edited August 5, 2019 by skyteam78
Corsair Employee Corsair GregX Posted August 5, 2019 Corsair Employee Posted August 5, 2019 I assume you are looking for dimension of the XD5 unit together with fan mounting bracket. It's 102mm (red line).
hahler2 Posted August 8, 2019 Author Posted August 8, 2019 Thank you that is exactly what I was looking for!
hahler2 Posted August 9, 2019 Author Posted August 9, 2019 One other question. Is the plug on the temp cable a standard plug or is it proprietary? Just wondering if it could be plugged into a temp sensor header on a motherboard or if it will only work with the Commander Pro.
DevBiker Posted August 9, 2019 Posted August 9, 2019 It's a standard temp cable - the Commander Pro's temp sensors are standard 10K temp sensors. Nothing proprietary about it at all.
GatorArchitect Posted May 20, 2020 Posted May 20, 2020 I assume you are looking for dimension of the XD5 unit together with fan mounting bracket. It's 102mm (red line). I am looking to plan out a build and am modeling up everything in 3ds MAX. I can't find any dimensions for the XD5 pump. Is it possible to share the 3d model that you show a screengrab from? If not, can you share front, side, top, etc. view drawings with dimensions so that I can model it myself? Thanks
Recommended Posts