Jump to content
Corsair Community

MP600 2 TB Slow Performance


Recommended Posts

Hi,

 

I'm running a 2 TB MP600 drive with latest firmware (11.1) on an Aorus Xtreme X570 motherboard also with the latest firmware (F3e).

 

I seem to be getting performance readings that are notably worse than others in CrystalDiskMark especially on the seq write and 4K Q8T8 writes (almost a factor of 2 off).

 

732587930_mp600benchmark.png.2544688651fb701ef0fa864baf6102e3.png

 

Compare this to reviews at these locations:

- https://www.amazon.com/Corsair-Force-MP600-Gen4-PCIe/dp/B07SNGBW84?th=1#customerReviews

 

- https://www.guru3d.com/articles_pages/corsair_mp600_pcie_4_nvme_ssd_review,14.html

 

Any ideas?

Link to comment
Share on other sites

  • Replies 84
  • Created
  • Last Reply

Top Posters In This Topic

Hi, as noted I am running the latest firmware - I upgraded using the SSD toolbox.

 

I just ran the test again after confirming there are no other reading or writing processes. Similar result. See attached.

 

Any suggestions? Should I return the drive?

 

150427774_MP600Benchmark2.jpg.1305e06947b8d38c65843aa240b1ab1a.jpg

Link to comment
Share on other sites

  • Corsair Employees

Hm, with that CPU, the 4K performance should be much better. I was wondering if you were potentially running running a 3600.

 

If it's not too much trouble, hang tight, I'm going to see if I can get some more information.

Link to comment
Share on other sites

I was I was getting the performance you are getting Chymerix. I am only getting only 54% of the advertised performance. Nothing using HDD at the time of the test. Any insight would be nice.

1414518426_Screenshot(3).png.47adc327b71248f0e86e7b09202f7f2a.png

Edited by Hamerson
Link to comment
Share on other sites

Hm, with that CPU, the 4K performance should be much better. I was wondering if you were potentially running running a 3600.

 

If it's not too much trouble, hang tight, I'm going to see if I can get some more information.

 

Hi Kevin - any updates for us? My return window closes in a few days. Thanks!

Link to comment
Share on other sites

OP, can you try running the 4KiB as Q32T8 rather than Q8T8? We'd like to see the results of that test. Thank you.

 

Sorry for the delay. I returned to the office today.

 

No problem. Please see attached - not much difference.

 

1624065176_MP600Benchmark3.jpg.f601953a043729c9f7acf39bb75e1228.jpg

Link to comment
Share on other sites

Kevin and Chymerix. Well I figured out one part of my problem. For some odd reason my BIOS was defaulting the CPU yo 800Mhz. I changed the setting to Auto and it now sees the CPU at 3.6Ghz and will boost clock now. I reran the test and got solid solid numbers (see The attached). I was curious about the test Kevin had you run Chymerix so I ran the test as well and have attached the results as well for reference.

 

Kevin I would also appreciate any feedback to let me know my test numbers look on par to you as well. Thanks

1890152572_Screenshot(5).png.6af21f3028367bc138611a9c6f2d8260.png

846812213_Screenshot(7).png.5f8c4bb3f4b0528b629be517030fe48e.png

Link to comment
Share on other sites

  • Corsair Employees
Kevin and Chymerix. Well I figured out one part of my problem. For some odd reason my BIOS was defaulting the CPU yo 800Mhz. I changed the setting to Auto and it now sees the CPU at 3.6Ghz and will boost clock now. I reran the test and got solid solid numbers (see The attached). I was curious about the test Kevin had you run Chymerix so I ran the test as well and have attached the results as well for reference.

 

Kevin I would also appreciate any feedback to let me know my test numbers look on par to you as well. Thanks

 

Hi Hamerson,

Can you also post screenshots of your BIOS? I'd like to see what the basic configurations are for CPU, DRAM, etc.

Link to comment
Share on other sites

Hi there, guess I have the same problem?

 

 

 

Also the loading time of Win10 after Login is really slow, but I don't know if thats due to the SSD.

 

My specs:

Asus Crosshair VIII Hero

AMD Ryzen 9 3900x

Corsair Dominator Platinum RGB 64GB (CMT64GX4M4C3200C16)

MP600 2TB

MP600 1TB

 

Everything running at stock settings.

mp600cdm.PNG.09219fd1cdfc1289434bc216f798eae9.PNG

Link to comment
Share on other sites

Kevin and Chymerix. Well I figured out one part of my problem. For some odd reason my BIOS was defaulting the CPU yo 800Mhz. I changed the setting to Auto and it now sees the CPU at 3.6Ghz and will boost clock now. I reran the test and got solid solid numbers (see The attached). I was curious about the test Kevin had you run Chymerix so I ran the test as well and have attached the results as well for reference.

 

Kevin I would also appreciate any feedback to let me know my test numbers look on par to you as well. Thanks

 

What about your infinity fabric speed. Are you running 1:1 ratio with your ram? If the CPU frequency wasn't properly set I wonder if your IF speed is also wrong and maybe that is effecting your scores.

 

When looking in Ryzen master this shows up as a line with data for Coupled Mode, Memory Clock, and Fabric Clock. Typically the clocks should be equal unless your trying to do something special.

Edited by A Computer Guy
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


×
×
  • Create New...