Jump to content
Corsair Community

H115i Platinum pump RGB not working can't find the right wire from SATA power to PSU


sauravthakur12
 Share

Recommended Posts

I did provide individual connection to PSU to sata power but it did not lit the RGB of pump header, so my new theory is it has to do with 3.3volts point in a sata power(5 wires including orange) to 6pin and which I am not able to find anywhere online or at shops, I am curious if people got it working with traditional 4 wire sata power from PSU, what am I missing here? Btw my chipset is msi z370A pro if that has to do with anything, I can see the AIO in my Icue but color changes arent working for pump(its not lighting to begin with) btw The cooling shows that its working properly.
Link to comment
Share on other sites

The lighting actually uses the 5V rail, not the 3.3V rail. I'm fairly certain that the cooler doesn't use the 3.3V rail at all - just the 12V and 5V rail. Which means that it'll work with a straight SATA connection or even one with a molex to sata adapter (not recommended, btw).

Do color changes work for the fans? Is it just the pump that's out?

Link to comment
Share on other sites

 Share

×
×
  • Create New...