lunaismoon Posted March 17, 2005 Share Posted March 17, 2005 Abit AV8 VIA K8T800 Pro AMD 3200+ corsair twinX dual channel 3200 CPU-Z Memory Slot info: Slot #1 CMX256-A-3200C2 Corsair Slot #2 CMX256-A-3200C2 Corsair Slot #3 CMX256-A-3200 Slot #4 CMX256-A-3200 I'd like to know the correct settings to getting this Mobo to see all 4 slots of the above memory please. Or any info. I've spent all day reading various message boards to no avail. I've tried some BIOS changes ( changing from 400 to 333, changing from 1T to 2T) and they haven't worked so I may not be reading the right information. I'm looking for a definitive answers (maybe my two sets are not compatible? but they were on my last P4 system) Thanks. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted March 17, 2005 Corsair Employees Share Posted March 17, 2005 What exactly is the problem? It will not post with all 4 insalled or runs at DDR333? Dim Voltage to + 2.8 Volts: CAS Latency CL=3.0 Row Cycle Time tRC Bios Default Row Refresh Cyc Time tRFC Bios Default Ras# to CAS# delay tRCD 3 Row to Row delay Bios Default Min Ras# Active Time tRAS 8 Row Precharge Time tRP 3 Write Recovery Time Bios Default Write to Read delay Bios Default Read to Write Delay Bios Default Refresh Period tREF Bios Default Enable 2T Timing Enabled Then test the system with http://www.memtest.org and make sure it's stable! Link to comment Share on other sites More sharing options...
lunaismoon Posted April 8, 2005 Author Share Posted April 8, 2005 Motherboard: A8V Deluxe CPU: AMD 64 3200+ MY MEMORY: 4 sticks of 256mb PC4000 XMS CPU-Z Memory Slot info: Slot #1 CMX256-A-3200C2 Corsair - on compatability list Slot #2 CMX256-A-3200C2 Corsair - on compatability list Slot #3 CMX256-A-3200 - *not* on compatability list Slot #4 CMX256-A-3200 - *not* on compatability list ok, so the bottom 2 are no on the compatability list here: http://compatible.corsairmemory.com/memorysearch.aspx?modelid=531#othermodules But if i take out the " CMX256-A-3200C2 " and put the " CMX256-A-3200 " in their place the system runs fine. It just won't recognize all 4 modules even though CPUZ will detect them. Also, all 4 ran fine together on my former P4 system. IS there a BIOS setting I'm missing or will these never be recognized on this motherboard :confused: ? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted April 8, 2005 Corsair Employees Share Posted April 8, 2005 Can you tell me our modules part# and revision (How To Read the Memory Label) of all of the modules? Link to comment Share on other sites More sharing options...
lunaismoon Posted April 9, 2005 Author Share Posted April 9, 2005 Can you tell me our modules part# and revision (How To Read the Memory Label) of all of the modules? Module Part #'s Slot 1: XMS 3202,v 1.2, 0324149, CL2 Slot 2: XMS 3200, v 4.1, 0426060 Link to comment Share on other sites More sharing options...
Wired Posted April 9, 2005 Share Posted April 9, 2005 The part #s are not listed in your post. Please re-read that thread. Link to comment Share on other sites More sharing options...
lunaismoon Posted April 12, 2005 Author Share Posted April 12, 2005 The part #s are not listed in your post. Please re-read that thread. Whoops. Sorry. Here they are: Row 1: CMX256A-3200 Row 2: CMX256A-3200C2 Of these two, which ones are better and I should get more off to work wit this mobo? Link to comment Share on other sites More sharing options...
lunaismoon Posted April 12, 2005 Author Share Posted April 12, 2005 If I get TWINX1024-3200C2 will they be compatible with the CMX256A-3200C2? Link to comment Share on other sites More sharing options...
Wired Posted April 12, 2005 Share Posted April 12, 2005 If they're the same revision, yes. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.