FCLiverpool Posted June 16, 2019 Share Posted June 16, 2019 Guten Tag, ich habe für mein Dark Base 700 Corsair LL Lüfter gekauft. Insgesamt 7 Stück, 3 kommen auf die Aio* Wasserkühlung und der Rest ins Gehäuse.* Die Frage ist nur, brauche ich etwas zusätzliches dafür, damit ich die Lüfter steuern kann bzw. Drehzahl, Farben usw.? Beim 3× Pack bekommt ja so ein Hub dazu, aber dort kann ich ja nur 6 Lüfter anschließen.* Ich habe 6× 120mm und 1×140mm Wäre nett, wenn mir jemand helfen könnte. Ich kenne mich da 0 aus. Link to comment Share on other sites More sharing options...
muvo Posted June 16, 2019 Share Posted June 16, 2019 (edited) Also wenn du einen trippelpack oder doppelpack gekauft hast, hast du alles was die RGB seite angeht (node und hub). Also braust du 2 hubs für 7 lüfter. Welche kombi hast du gekauft ? Wenn du dir rmp auch per link steuern möchtest benötigst du einen commander pro, andernfalls kann das auch dein Mainboard übernehmen. Du kannst ja mal bei Gelegenheit die FAQ: Corsair RGB , oder per Anhalter durch das Corsair rgb Universum durchlesen. Edited June 16, 2019 by muvo Link to comment Share on other sites More sharing options...
Corsair Employees Bluebeard Posted June 16, 2019 Corsair Employees Share Posted June 16, 2019 Du benötigst hierfür zwei der RGB Fan hubs. Du kannst keine 7 Lüfter an einen RGB Fan Hub verbinden. An die Lighting Node Pro kannst du aber beide Anschließen. Somit müsstest du, falls nicht vorhanden noch einen hier über uns kaufen: https://www.corsair.com/p/CO-8950020 Link to comment Share on other sites More sharing options...
FCLiverpool Posted June 16, 2019 Author Share Posted June 16, 2019 Genau das wollte ich wissen. Danke! Link to comment Share on other sites More sharing options...
FCLiverpool Posted June 19, 2019 Author Share Posted June 19, 2019 Hallo, habe mir das Teil gekauft. Aber woher zum teufel soll ich jetzt ein RGB LED Kabel herbekommen? Einfach nur lächerlich das sowas nicht dabei ist. Link to comment Share on other sites More sharing options...
muvo Posted June 19, 2019 Share Posted June 19, 2019 Das Kabel liegt bei der node (oder commander pro) dabei. Sollte es fehlen bitte beim Kundenservice melden Link to comment Share on other sites More sharing options...
FCLiverpool Posted June 19, 2019 Author Share Posted June 19, 2019 Ich habe das node. Aber es liegt dort nur 1 Kabel dabei. Ich brauche aber zwei Link to comment Share on other sites More sharing options...
muvo Posted June 20, 2019 Share Posted June 20, 2019 Ich habe das node. Aber es liegt dort nur 1 Kabel dabei. Ich brauche aber zwei ist normal, du kannst beim Kundenservice nachfragen ob sie dir ein kabel zu Verfügung stellen. Link to comment Share on other sites More sharing options...
FCLiverpool Posted June 22, 2019 Author Share Posted June 22, 2019 Habe mir das Commander Pro dazu gekauft. Link to comment Share on other sites More sharing options...
muvo Posted June 23, 2019 Share Posted June 23, 2019 Habe mir das Commander Pro dazu gekauft. auch eine Möglichkeit und läuft nun alles zu deiner Zufriedenheit ? Link to comment Share on other sites More sharing options...
Corsair Employees Bluebeard Posted June 23, 2019 Corsair Employees Share Posted June 23, 2019 Hi FCLiverpool, sorry, aber das ist mir tatsächlich entfallen. Das Kabel liegt dem RGB Hub tatsächlich nicht bei und du benötigst dieses zur Verbindung an die Lighting Node Pro. Freut mich zu lesen, dass du den Commander Pro eine Chance gegeben hast und somit das Kabel nun hast. Alternativ hätten wir dir aber auch eins zusenden können. Ich hoffe du hast nun alles angeschlossen bekommen und es läuft deinen Wünschen nach. Grüße Link to comment Share on other sites More sharing options...
FCLiverpool Posted June 24, 2019 Author Share Posted June 24, 2019 (edited) Danke nochmals an alle. Ich warte noch auf paar Teile, da ich mir einen neun Rechner zusammenstelle. Sollten es Probleme geben, werde ich mich an euch wenden. Edit: Ich habe eine Frage. Ich besitze das Corsair HX850i mit corsair link. Kann ich das Netzteil irgendwie mit Commander Pro verbinden? Oder muss ich es extra an das Mainboard anschließen? Lg Edited June 24, 2019 by FCLiverpool Link to comment Share on other sites More sharing options...
muvo Posted June 25, 2019 Share Posted June 25, 2019 Nein per USB Kabel der psu einfach an den commander pro anschließen Link to comment Share on other sites More sharing options...
Corsair Employees Bluebeard Posted June 30, 2019 Corsair Employees Share Posted June 30, 2019 Der Commander Pro hat einen integrierten USB Hub und bietet 2 USB 2.0 Header für weitere Geräte wie dein HX850i. Direkt anschließen am Commander Pro und das wars. Link to comment Share on other sites More sharing options...
Recommended Posts