Jump to content
Corsair Community

Failed Memory Stick


Al_Timer

Recommended Posts

Corsair says I must have contact with tech support before I can get a request for an RMA, so here goes: I have had "blue screens of death" (BSOD) intermittenly for a couple of years now, maybe once quarterly, until a couple of weeks ago. At that time windows would shutdown (BSOD)within minutes of booting. I did uninstall my most recent hardware install but this did not help. To make a long story short, I ordered a new stick of memory from a Corsair dealer. The same DIMM DDR 266 that I used when I built the pc. It fixed the problem. My pc has been running continuously for a week now with no more BSOD.

 

Tech Support, please respond to this so I can get a RMA.

Thanks

Link to comment
Share on other sites

Can you tell me our modules part# (How To Read the Memory Label) and the make and model of MB you have along with the CPU speed and it’s FSB as well? In addition, please tell me the bios settings you have set for both CPU and memory and any performance settings that you may have set?

 

ITEM # 140826

MB = ASUS A7V266-E, KT266A, SOCKET A, 3 DDR DIMM, ATX

AMD Athlon XP 1600 (1.40 GHz) - 266 MHz System Bus Speed

BIOS settings are default

 

Memory Labels: CORSAIR

pc-2100

 

CM64SD256-2100/Y

015037

PC2100U-25330-B1

 

RED LABEL: 17228

Warranty Void

If Removed

 

I could send a photo if you would tell me how?

Link to comment
Share on other sites

  • Corsair Employees

Please call her at 888-222-4346 and dial "0" that will take you right to her.

Also we do not post anyones direct phone# or email on the forum. So it was removed from your post. And I would remove your info as well if it had been posted.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...