Jump to content
Corsair Community

H115i RGB Platinum: USB does not fit


petasis
 Share

Recommended Posts

Hi all,

 

I have just installed a Corsair Hydro Series H115i RGB Platinum 280 on a Gigabyte X399 AORUS XTREME. However, I was unable to put the usb cable on the pump - it does not fit. In order to fit it, I have to remove the memory stick from the board, but I need my memory.

Is there a solution?

The usb connector goes up to the middle of the memory stick, so it is not a matter of a few millimeters...

Link to comment
Share on other sites

I cannot find an alternative online. I measured the usb header provided with the kit, it is huge (1 cm the rubber part only, and the micro usb does not fit inside the pump entirely).

 

Is such space (more than 1 cm at the pump side) within specs of TR4 socket?

I am trying to figure out if it corsair's fault, or gigabyte's fault.

Link to comment
Share on other sites

  • 2 weeks later...

I finally ordered one of these:

 

https://www.ebay.com/itm/Type-C-90-Degree-Right-Angle-USB-C-Fast-Data-Sync-Charging-Charger-Android-Cable/192763057558

 

s-l1600.jpg

 

It fits, and leaves a tiny space from the RAM. It does not touch the RAM at all.

 

Be careful to order to micro-usb cable, not the usb-c!

 

Now I am only missing a usb to motherboard header adapter...

Link to comment
Share on other sites

 Share

×
×
  • Create New...