Help please Corsair SCIMITAR PRO RGB Mouse doesn't work at all in Suse

[Enela]

I have the Corsair SCIMITAR RGB mouse (which works), and the most recent Corsair Gaming SCIMITAR PRO, I got this last one because it has onboard memory, so I could set macros or whatever bindings in windows, and have it working in Suse.

 

The surprise is that it doesn't work at all in Suse, works perfectly at boot (BIOS), and in Windows.

 

It doesn't get any output in

cat /dev/input/mice

 

Relevant output from:

 

hwinfo --mouse

 

35: USB 00.0: 10503 USB Mouse

[Created at usb.122]

Unique ID: VBUu.+GZlG+AMzX5

Parent ID: ADDn.4Nx_qoDfSd7

SysFS ID: /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0

SysFS BusID: 1-1.5:1.0

Hardware Class: mouse

Model: "Corsair Gaming SCIMITAR PRO RGB Mouse"

Hotplug: USB

Vendor: usb 0x1b1c "Corsair"

Device: usb 0x1b3e "Corsair Gaming SCIMITAR PRO RGB Mouse"

Revision: "1.09"

Serial ID: "0603F027AEBD1500562C2173F5001941"

Compatible to: int 0x0210 0x0015

Driver: "usbhid"

Driver Modules: "usbhid"

Device File: /dev/input/mice (/dev/input/mouse0)

Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event6, /dev/input/by-id/usb-Corsair_Corsair_Gaming_SCIMITAR_PRO_RGB_Mouse_0603F027AEBD1500562C2173F5001941-event-mouse, /dev/input/by-path/pci-0000:00:1a.0-usb-0:1.5:1.0-event-mouse, /dev/input/by-id/usb-Corsair_Corsair_Gaming_SCIMITAR_PRO_RGB_Mouse_0603F027AEBD1500562C2173F5001941-mouse, /dev/input/by-path/pci-0000:00:1a.0-usb-0:1.5:1.0-mouse

Device Number: char 13:63 (char 13:32)

Speed: 12 Mbps

Module Alias: "usb:v1B1Cp1B3Ed0109dc00dsc00dp00ic03isc01ip02in00"

Driver Info #0:

Buttons: 5

Wheels: 1

XFree86 Protocol: explorerps/2

GPM Protocol: exps2

Config Status: cfg=new, avail=yes, need=no, active=unknown

Attached to: #51 (Hub)

 

evtest

 

Select the device event number [0-18]: 6

Input driver version is 1.0.1

Input device ID: bus 0x3 vendor 0x1b1c product 0x1b3e version 0x111

Input device name: "Corsair Corsair Gaming SCIMITAR PRO RGB Mouse"

Supported events:

Event type 0 (EV_SYN)

Event type 1 (EV_KEY)

Event code 272 (BTN_LEFT)

Event code 273 (BTN_RIGHT)

Event code 274 (BTN_MIDDLE)

Event code 275 (BTN_SIDE)

Event code 276 (BTN_EXTRA)

Event type 2 (EV_REL)

Event code 0 (REL_X)

Event code 1 (REL_Y)

Event code 8 (REL_WHEEL)

Event type 4 (EV_MSC)

Event code 4 (MSC_SCAN)

Properties:

Testing ... (interrupt to exit)

 

 

 

You'll see three enties for Corsair here, I have a Corsair keyboard, plus both models of mice mentioned:

 

lsusb

Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub

Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Bus 001 Device 004: ID 1b1c:1b3e Corsair

Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Bus 004 Device 003: ID 05e3:0612 Genesys Logic, Inc.

Bus 004 Device 002: ID 05e3:0612 Genesys Logic, Inc.

Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

Bus 003 Device 003: ID 05e3:0610 Genesys Logic, Inc. 4-port hub

Bus 003 Device 006: ID 1b1c:1b1e Corsair

Bus 003 Device 034: ID 1b1c:1b07 Corsair

Bus 003 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub

Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

 

Of course I tried to boot just with the SCIMITAR PRO, tried all USB ports, updated every system that could help... Nothing.

 

Any ideas? :/

https://diceus.com/offshore-software-development-benefits/

Edited May 23, 2019 by Enela