shane3621 Posted May 5, 2019 Share Posted May 5, 2019 I have 4 LL120's set on channel 2 and 4 of the corsair RGB strips on channel one, the strips work fine. the LL120's work fine in "stand by" but when the profile wakes up, the fans are not illuminating. any ideas? Link to comment Share on other sites More sharing options...
Johnny_B500 Posted May 5, 2019 Share Posted May 5, 2019 (edited) That setup won't work. You would need your RGB strips plugged into a LED channel either on a Lighting Node Pro or Commander Pro and then, your LL fans would need to be on a separate RGB Hub. See images below for reference: RGB Strips using Lighting Node Pro LL fan RGB Hub setup Note that your 4 x fans need to be in series on the RGB Hub in ports 1 through 4. You will additionally need to assign the fans and LED Strips in iCUE under the Lighting Channel tab. I think you would also find it beneficial to check out the RGB Guide/FAQ linked below: http://forum.corsair.com/v3/showthread.php?t=173880 Edited May 6, 2019 by Johnny_B500 Link to comment Share on other sites More sharing options...
DevBiker Posted May 6, 2019 Share Posted May 6, 2019 Well, there's no reason why that setup wouldn't work. And since the fans work when in demo mode, he does have them in order. So ... what about the effects? Did you actually apply them to the fans? In the iCUE preview screen, do you see the effects "playing" on the fans? What happens if you set instant lighting? Link to comment Share on other sites More sharing options...
Johnny_B500 Posted May 6, 2019 Share Posted May 6, 2019 Well, there's no reason why that setup wouldn't work. And since the fans work when in demo mode, he does have them in order. So ... what about the effects? Did you actually apply them to the fans? In the iCUE preview screen, do you see the effects "playing" on the fans? What happens if you set instant lighting? Valid points, I misinterpreted the OP's issue. This is why you get paid the big bucks. :sigh!: Link to comment Share on other sites More sharing options...
DevBiker Posted May 6, 2019 Share Posted May 6, 2019 Valid points, I misinterpreted the OP's issue. This is why you get paid the big bucks. :sigh!: :rofl::rofl::rofl: I wish! We've all mis-read posts. It happens. Glad that you're here helping out! Link to comment Share on other sites More sharing options...
Zotty Posted May 6, 2019 Share Posted May 6, 2019 :rofl::rofl::rofl: I wish! We've all mis-read posts. It happens. Glad that you're here helping out! Can Confirm.... on both points :) Link to comment Share on other sites More sharing options...
Zotty Posted May 6, 2019 Share Posted May 6, 2019 get paid the big bucks. :sigh!: there is no Bucks lol.. just the feel good factor of helping others understand their RGBz :) Link to comment Share on other sites More sharing options...
shane3621 Posted May 6, 2019 Author Share Posted May 6, 2019 (edited) everything is setup exactly as the diagram above states. all effects work properly when I go in. but they do not save. Edited May 6, 2019 by shane3621 Link to comment Share on other sites More sharing options...
shane3621 Posted May 6, 2019 Author Share Posted May 6, 2019 the light strips stay where they are supposed to, my ram does as well. its just the fans Link to comment Share on other sites More sharing options...
Johnny_B500 Posted May 6, 2019 Share Posted May 6, 2019 everything is setup exactly as the diagram above stats. all effects work properly when I go in. but they do not save. Unfortunately, I do not have answer for you. Did/have you tried the steps that DevBiker mentioned previously and what were the results? I am also curious to what version of iCUE you are running. Link to comment Share on other sites More sharing options...
shane3621 Posted May 6, 2019 Author Share Posted May 6, 2019 yep I tried instant lighting with the same results. I am running 3.15.101. says its the latest version Link to comment Share on other sites More sharing options...
Johnny_B500 Posted May 7, 2019 Share Posted May 7, 2019 If it was me, and simply as part of troubleshooting, I'd try an earlier version of iCUE. Saying that, if you have a Platinum AIO cooler that might not be the best choice as you could possible introduce a USB disconnection issue on anything earlier than 3.15.101. Is this a new build and/or have your updated iCUE recently? Maybe one of the other guys will chime in with a different approach... Link to comment Share on other sites More sharing options...
Recommended Posts