Jump to content
Corsair Community

H100i RGB - Swap stock ML fans with LL


RetroGamer360
 Share

Recommended Posts

Hi,

 

I am upgrading my CPU cooler from the H80i v2 to the H100i RGB Platinum. The H100i comes with ML series fans. I prefer to look of the LL series RGB lighting, which match the other fans in my case. Is there any issue/downside to swapping the stock ML fans with the LL fans?

 

Thank you,

 

Michael

Link to comment
Share on other sites

If your case configuration can accommodate as push/pull setup, I used my ML fans to pull and the LL fans to push. That way I could have the LL fans facing the front of my case or top, depending on how you install the rad. To your point, the RGB is much nicer on the LL ;)

 

Tony

Link to comment
Share on other sites

Be carefull because I want buy only fans, but have diferent specs...

 

120 FANS...

 

Fan Specs Corsair Hydro H100i RGB Platinum:

Fan Speed: 2400 RPM

Fan Airflow: 75 CFM

Noise Level: 37 dBA

Fan Static Pressure: 4.2 mmH2O

 

Fan Spec Kit ML120PRO RGB:

Fan Speed: 400 - 1600 RPM

Fan Airflow: 47.3 CFM

Noise Level: 25 dBA

Fan Static Pressure: 1.78 mmH2O

 

140 FANS...

 

Fan Specs Corsair Hydro H115i RGB Platinum:

Fan Speed: 2000 RPM

Fan Airflow: 97 CFM

Noise Level: 37 dBA

Fan Static Pressure: 3 mmH2O

 

Fan Spec ML140PRO RGB:

Fan Speed: 400 - 1200 RPM

Fan Airflow: 55.4 CFM

Noise Level: 20.4 dBA

Fan Static Pressure: 1.27 mmH2O

 

AIOs works with fans ML140PRO but with RGB.

Link to comment
Share on other sites

 Share

×
×
  • Create New...