Jump to content
Corsair Community

All leds in fan


Andyinco
 Share

Recommended Posts

Hi all. I have a CORSAIR Crystal Series 570X RGB, with its 3 RGB fans, with its RGB HUB, and I have also bought EXTERNAL BOX FAN 12 CM.PACK 3 CORSAIR DUAL LIGHT (CO-9050072-WW) and 1 EXTERNAL BOX FAN 12 CM .CORSAIR MAGNETIC LEVIT (CO-9050075-WW). They include another RGB HUB and 1 Lithting Node. And I want the 7 to work. Those who came with the box go well, connected to your HUB. But of the other 4, I only get 3 to work at once. The fourth, if I connect it to your Hub, does not go, nor instruct ICUE or LINK. If I connect it to the 4 hole of the first HUB, I get it to light up, but only in white. What I can do? Thank you.
Link to comment
Share on other sites

The SP120-RGB fans that come with the 460 and 570X are not compatible with the other RGB fan types (HD, ML, LL). You cannot combine them on the same RGB Lighting Hub.

 

In order to make this work, you will need to put the SP120-RGB on the RGB Lighting Hub that came with the case and leave them running from the thumb controller. The RGB Lighting Hub and Lighting Node Pro that came inside the LL120 x 3 pack can be used to power the 3 LL fans and 1 ML-RGB fan, but you must run two seprate RGB Lighting Hubs.

 

There is no reason to use Link at this point and it has lesser capabilities than the iCUE for fan lighting. In iCUE, go to "Lighting Setup" and designate you have 4 x LL fans. Since the ML fan only has 4 LEDs compared to the 16 on each LL, the effect will not always appear the same, but this is likely preferable to buying a third RGB Lighting Hub for 1 ML fan. You must use port 1-4 on the RGB Lighting hub for the 3 LL and 1 ML fan.

Link to comment
Share on other sites

Thanks for your reply. I have RGB LIghting working ok. But I can not get the other 4 fans to work at the same time with the other RGB Lighting Hub and Lighting Node Pro. I get the variable LED system to work with 3, the 4 is left with white light. I installed ICUE and configured for 4, but I can not get that changed, and that's what I want.
Link to comment
Share on other sites

 Share

×
×
  • Create New...