Dragonvalkyrie Posted April 4, 2019 Share Posted April 4, 2019 Hi I am building a new system and I have the h100i RGB platinum and just bought the commander pro but my question is can I plug the 3 pin and usb 2 header into the commander pro instead of the motherboard Link to comment Share on other sites More sharing options...
c-attack Posted April 4, 2019 Share Posted April 4, 2019 There is no reason to so since it is not a control wire. That reports a pump speed to the BIOS and when on cpu fan will give you a boot error warning if it fails on power on. Aside from that, it does not send power or speed signals. The usb 2 header definitely can go on the Commander Pro. Link to comment Share on other sites More sharing options...
Dragonvalkyrie Posted April 4, 2019 Author Share Posted April 4, 2019 Ok so the 3 pin plugs into the motherboard and I can connect the usb onto the commander pro Link to comment Share on other sites More sharing options...
DevBiker Posted April 4, 2019 Share Posted April 4, 2019 Ok so the 3 pin plugs into the motherboard and I can connect the usb onto the commander pro Yes, that's correct. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.