Jump to content
Corsair Community

Bad TWINX1024-4400C25


Yamabushi

Recommended Posts

Hello

 

I have a problem with Corsair Memory.

 

My computer is as follows:

DFI LanParty Ultra-D mb

Athlon 64 3200+

Corsair TWINX1024-4400C25 XMS4400

Gainward GS 6600GT

Hitachi SATA 160GB hard drive

Antec 550W PSU

 

First I noticed some problems running my memory in dual channel, Super Pi would give me "NOT EXACT IN ROUND" message, computer would restart and other problems. I suspected on memory and decided to test it with MemTest+ 1.51. Both modules were tested with these settings: DDR400 2.5-4-4-8-1T@2.75V(later I tried increasing voltage but with no result). One module performed flawlessly for more than 6hours and more than 25 passes(even on 550MHz) and the other would report errors in test #7 on the first pass(both 400MHz and 550MHz). I tried it with everything set to auto in bios, and with recommend settings from dfi.

 

Is this enough for RMA?

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...