Jump to content
Corsair Community

H100v2 with ML120s connected - RGB not working?


soochsandals
 Share

Recommended Posts

So I have a H100v2 AIO cooler that had the original fans connected to its Y hub with 2 additional ML120s for case fans. I have the commander pro and rgb hub as the original 2 ML120s are working fine. I decided to add 2 more to my radiator, they are on and working but the RGB is not. I have the ML120s as radiator fans connected to the Y splitter where it covered the cpu. They are also connected to the commander pro, making sure I put the right ones in spots 3 and 4.

 

The rgb is not working on these, does it have to do with being connected to the pump head? should I get another splitter and connect them directly to my mother board? what is the impact of not having the fans of the radiator connected directly to the pump Y splitter?

Link to comment
Share on other sites

It does not matter where the fan power comes from for lighting purposes. Each RGB fan has its own lighting wire and that is the key determinant. I am a little turned around in your description. The original grey SP120L fans are not RGB and I am assuming those are not longer on the radiator. The "additional ML120s" are ML120 RGB (not Pro). You added 2 more ML120-RGB and now have 4 running from the H100i v2 for fan power, and all 4 connected in the 1-4 slots on the RGB Lighting Hub.

 

1) In iCUE, so to the Commander Pro tab. Click on Lighting Set-up. Make sure your channel is set to 4 ML-RGB fans.

 

2) RGB Lighting Hub fans 1 and 2 work, but 3 & 4 do not? What happens if you switch fans 2 and 3? These things work in serial so one bad fan will stop the circuit.

Link to comment
Share on other sites

#1 worked now that its set to 4 :) thank you very much for your assistance

 

sorry for the not well thought out question, I was just really unsure why the RGB wasn't working. I had originally bought the 3 pack ML120 RGB PRO but had only 2 for case fans with the original SP120L as 2 radiator fans. I bought an additional ML120 and installed those 2 as the radiator fans. I didn't know I had to change the settings in the lightning setup! Works perfectly now.

Link to comment
Share on other sites

 Share

×
×
  • Create New...