Jump to content
Corsair Community

Can't get RGB Led Lighting PRO Expansion kit to work


TheTiesThatBind
 Share

Recommended Posts

Hello, I just received a brand new RGB LED Lighting pro expansion kit (CL-8930002) but I can't make it work. I connect the Led Strips together and then I connect the extension cables on the Corsair Commander PRO, I'm going to iCUE trying to set them up but they are always off, they don't light even when I power on my PC. Are they faulty?

 

I tried both slots 1 and 2 of Commander Pro and both slots work fine (I plugged the RGB Controller of my ML Fans).

 

Any ideas? Am I doing something wrong?

Link to comment
Share on other sites

The extension cable you're using is probably not the extension cable. You're probably using the RGB cable to connect a lighting hub to a Commander Pro. Try connecting the lighting strips directly without the cable.

 

Very common mistake.

 

Yes, you are right, I fixed it already I just forgot to update the topic. I was connecting the 3 pin with 2 cords cables.

 

Thanks for your help!

 

Kind regards

 

PS. You should include some basic instructions :D

Link to comment
Share on other sites

 Share

×
×
  • Create New...