Jump to content
Corsair Community

Bad stick of CMX512RE-3200LL


cadsude

Recommended Posts

I purchased 2 sticks of CMX512RE-3200LL; the system would not load windows with both sticks installed. Windows repeatedly had issues loading certain dlls etc. So, I decided to remove one stick and try setting windows back up again. Again, same problems loading windows. Finally, I tried the second stick all by itself, and had absolutely no problems at all. The system appears to be stable so far with just the one stick of 512. It seems like a classic bad memory problem, and I was hoping to get an RMA.

 

 

 

thanks!

Link to comment
Share on other sites

  • Corsair Employees
I am sorry but the Tyan MB's may not support our low latency modules because they will not let you set the Dim Voltage. And I would suggest 2.75 Volts with these modules. You should be using CM72SD512RLP-3200 with this MB.
Link to comment
Share on other sites

  • Corsair Employees
Sure, we can try that if you like. But I am not confident that will solve the problem. I'm still not clear why the errors occur at the same exact address. Doesn't that suggest a bad spot on the memory?
Link to comment
Share on other sites

I'm sorry I didn't mean it that way; the errors were not exactly the same; nonetheless it seems that I simply have the wrong kind of ram for this system.

You mentioned using the CM72SD512RLP-3200......and I have noticed that thier is some TwinX recommended too.......which one will run better with my system? Can you install multiple sets of twin X ram?

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...