Soviet_Camacho Posted February 18, 2019 Share Posted February 18, 2019 I just bought my new dark core without the qi charger 2 days ago on sale. iv set up my profiles and everything updated the firmware and has been fine while on wireless. when i first got it i plugged it in wired to charge but Icue gave an error so i switched to wireless and plugged in the dongle and every thing worked fine and the battery showed full so i i just used it wirelessly. now its showing very low bat so i plugged it in and unplugged the dongle and now it keeps cutting out and and doesn't let me do anything ICue keep giving errors but wont say why the battery/status box just says error. The way to fix this is to first unplug the mouse then turn it off in that order. if not in that order the mouse wont actually turn off and the lights stay on. plugging back in the dongle and switching to wireless mode i get no issue what so ever other than the low battery. Has anyone else had this issue or know of a work around? maybe i have a bunk mouse out the box or firmware issue? i re-flashed the firm ware but still same issue not sure what else to try at this point other than a return. Any help would be appreciated Link to comment Share on other sites More sharing options...
Josey Wales Posted February 18, 2019 Share Posted February 18, 2019 I charge mine on a electrical USB type charger. It seems to wotrk fine. Link to comment Share on other sites More sharing options...
Soviet_Camacho Posted February 18, 2019 Author Share Posted February 18, 2019 i had to do the same but it doesnt seem right that i cant use it in wired mode Link to comment Share on other sites More sharing options...
Apophis3 Posted February 18, 2019 Share Posted February 18, 2019 Contact support to find out how to do a hard reset on the mouse. Link to comment Share on other sites More sharing options...
Soviet_Camacho Posted February 23, 2019 Author Share Posted February 23, 2019 Would a high polling rate cause this issue? Link to comment Share on other sites More sharing options...
Apophis3 Posted February 23, 2019 Share Posted February 23, 2019 If you wire it up and it doesn't work: 1) While still wired, turn mouse off, then back on. Happened to me a couple of times, and this worked. 2) Change cable. My USB cables from my older Logitech mice don't work, because the tips are fitted, and too thick on top, and press against the top. Probably causing pins to not align right. Link to comment Share on other sites More sharing options...
Soviet_Camacho Posted February 24, 2019 Author Share Posted February 24, 2019 now its doing it all the time like every 5-30 seconds after power the mouse off and back on and its doing it wirelessly as well my best bet is to return it now i dont think its a software thing Link to comment Share on other sites More sharing options...
Recommended Posts