nctsw Posted March 7, 2005 Share Posted March 7, 2005 I'm having problems running 2 pieces of VS1GB400KIT (4x512MB total) in this motherboard at 200MHz memory clock dual channel. It runs at 166MHz no matter what I do. I have set the DDR voltage to 2.7v, tested each module separately, but it simply refuses to run at 200. The bios version is F5, and I have emailed Gigabyte but have not received a response yet. The annoying thing about this motherboard is that there is no way to manually set the memory clock. The system needs to be delivered to the customer asap, so any help would be helpful. Thanks. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted March 7, 2005 Corsair Employees Share Posted March 7, 2005 With 4 modules that is correct, it will run at DDR333, and at the main bios screen hit CNTRL + F1 and you will have more options in the bios. And I would set the Dim Over Voltage control to +.2 Volts as well. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.