Jump to content
Corsair Community

Help w/ XMP on 32GB Vengeance RGB kit


dbzgurjen
 Share

Recommended Posts

Hello Corsair Forum,

 

I would just like to inquire for some help with my Corsair CMW32GX4M4c3000C15 32GB kit. It seems that whenever I try to enable XMP Profile #1 in the BIOS, my system would just lock up or not boot at all. I was wondering if anyone has a manual overclock configuration that may work w/ my system. I was able to achieve 2666MHz on the memory but would love to achieve the kit's rated speed of 3000MHz. Any help would be greatly appreciated.

 

Thanks.

 

P.S.

For PC Specs, see dropdown menu under dbzgurjen's PC Specs below my username.

Edited by dbzgurjen
Link to comment
Share on other sites

Your motherboard does not support that memory unfortunately. I had the same issue until gigabyte recently released a new bios.

 

Your ram, from that serial is https://www.corsair.com/uk/en/Categories/Products/Memory/Vengeance-PRO-RGB-Black/p/CMW32GX4M4C3000C15

 

On that page under 'tech specs' you will see the timings, voltage and speed used for xmp. It is what i did to get my 4000mhz rgp pro's to work before the new bios

 

it says

Tested Latency 15-17-17-35

Tested Voltage 1.35V

Tested Speed 3000MHz

 

* Do this at your own risk, i hold no responsibility and would advise contacting support first.

Link to comment
Share on other sites

 Share

×
×
  • Create New...