AMD Atlhon 64 & TWINX1024-3200C2PT

[lpgascon]

Hi

 

Here's my configuration

 

AMD Athlon 64 3200+ S939

ASUS A8V DLX

TWINX1024-3200C2PT

 

I was getting many errors when running Memtest with the following settings on my RAM (which was 2.5-3-3-8 at 2.6v)

 

So I first changed the settings to

 

2-3-3-6 (2.7v)

 

and i ran Memtest-86 v3.2 without any errors.

 

But then I read that with AMD the ram should be set to 2.5-3-3-6 (2.7v)

so I ran MemTest using the 2.5 settings but I'm getting a lot of errors.

 

What could be the problem??? Can I try to run my ram at 2-3-3-6

and expect to get good results even with a AMD or I should ask for a RMA from the store because the RAM may be bad? (because this ram is brand new).

 

Thanks

[Wired]

That doesn't make any sense! :confused:

 

If it works @ 2-3-3-6, go for it :) You could also try 2.5-3-3-6 @ 2.8 volts (warrantied up to, but not over, 2.9 volts)