Falcon01 Posted March 3, 2005 Share Posted March 3, 2005 I recently received two replacement modules for ones that I had sent in. One of the modules works fine, but the other when used individually or with the other module causes the PC to not boot at all. I've tested this with both modules in either of the RAM slots that are available on my motherboard. Mobo is Asus P4P800S. CPU is P4 1.7GHz. FSB is at 100MHz. All settings for CPU and RAM are set to Auto/default. Not utilizing the overclocking settings that are in the Asus BIOS. All of those settings are set to default/none. Both modules are CMX256A-2700C2. I've also tested the bad module in another system and had the same results. Thank you in advance for your assistance, Ryan Purkey Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted March 3, 2005 Corsair Employees Share Posted March 3, 2005 Did you get the modules from us? Or from your reseller? If you got them from us please reply to Customer Service ( The latst email you got from them ) and tell them one of the modules is not working. Link to comment Share on other sites More sharing options...
Falcon01 Posted March 3, 2005 Author Share Posted March 3, 2005 I received the modules from you. I will contact CS and work with them. Thank you for your help. Ryan Purkey Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted March 3, 2005 Corsair Employees Share Posted March 3, 2005 Please let me know and we will take care of the shipping both ways! Link to comment Share on other sites More sharing options...
Falcon01 Posted March 6, 2005 Author Share Posted March 6, 2005 I've gone through my email, including my offline archives and I am unable to find the email that CS sent me. Is there another way that I can contact them? Thanks in advance for your assistance. Ryan Purkey Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted March 7, 2005 Corsair Employees Share Posted March 7, 2005 Yes, 888-222-4346 and Dial "0". Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.