Jump to content
Corsair Community

Bad Module


Recommended Posts

Hi, I have tested my Corsair memory with Memtest-86 v3.2 and it is reporting two errors in test 2 and test 3.


My System:


MSI K8T Neo Motherboard (which I replaced during diagnosis to isolate the problem)

2 x 512MB CMX512-3200C2PRO - Installed in Slot 1 and 2 on Motherboard

(1) Lot 0346092

(2) Lot 0407103

Geforce 5700 Video Card

WD 80G Hard drive (8mg cache)


All Bios settings are at default or are detected by SPD. Nothing is user set. The memory timings are 2.5-3-3-8.


I have had several programs crash though very intermittently with the error reports refernecing a memory error, though I did not right down the location.


Please let me know how to proceed.

Link to comment
Share on other sites

I changed the voltage from auto to 2.7 and reran the test for approximately 12 hours, using slots 1 and 3, and have had no problems. I will consider the matter resolved and will keep the suggested configuration.


Thanks for the help.

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...