Zombiesfeelpain Posted December 2, 2018 Share Posted December 2, 2018 After updating my bios to version 1103 on my Asus Crosshair VII Wifi my Vengeance RGB Pro no longer shows in ICUE, I managed to replicate this issue by reinstalling the previous bios 1002 then reinstalling bios 1103. Maybe something to do with the AGESA code being updated in 1103 Link to comment Share on other sites More sharing options...
daniaal Posted January 1, 2019 Share Posted January 1, 2019 I am in the same boat LEDS no longer working after the update. Link to comment Share on other sites More sharing options...
Jesso2k Posted January 1, 2019 Share Posted January 1, 2019 (edited) I'm dead in the water with this now. I rolled back icue to 3.9.93 and was able to see the ram again, icue could read temps and timings but now change the colors on the sticks. Tried force updating the firmware from there but was left with one stick stuck in half red and the other lit up as it has been with no change. Getting frustrating, rolling back Asus firmware isn't a walk in the park, if I could refund the sticks I would. EDIT: I clawed back control by rolling back the bios. AGESA 1.0.0.6 wasn't booting my 3600 MHz sticks XMP profile anyways. Edited January 1, 2019 by Jesso2k Link to comment Share on other sites More sharing options...
Recommended Posts