guitarmech111 Posted February 28, 2005 Share Posted February 28, 2005 I just got this mobo and memory to go with a Athlon 3500+. I am not sure that the memory is setup correctly. The system seems like it should be faster. I think the memory might have something to do with it. I have not reset the default memory settings on the MSI NEO2 Platinum yet. What would be the fastest/safest settings for this memory on this NEO2? I am using this computer for digital audio recording with a firewire device. Any help will be greatly appreciated! Regards, Conley Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 28, 2005 Corsair Employees Share Posted February 28, 2005 Please try and load setup defaults and then set these settings manually. Dim Voltage to +2.7 Volts: CAS Latency CL=2.5 Row Cycle Time tRC Bios Default Row Refresh Cyc Time tRFC Bios Default Ras# to CAS# delay tRCD 3 Row to Row delay Bios Default Min Ras# Active Time tRAS 6 Row Precharge Time tRP 3 Write Recovery Time Bios Default Write to Read delay Bios Default Read to Write Delay Bios Default Refresh Period tREF Bios Default Enable 2T Timing Disabled Then test the system with http://www.memtest.org and make sure it's stable! If you have problems, I would set Enable 2T Timings to AUTO and test it again! Link to comment Share on other sites More sharing options...
guitarmech111 Posted February 28, 2005 Author Share Posted February 28, 2005 Thanks RAM GUY!! I will post the results. Please try and load setup defaults and then set these settings manually. Dim Voltage to +2.7 Volts: CAS Latency CL=2.5 Row Cycle Time tRC Bios Default Row Refresh Cyc Time tRFC Bios Default Ras# to CAS# delay tRCD 3 Row to Row delay Bios Default Min Ras# Active Time tRAS 6 Row Precharge Time tRP 3 Write Recovery Time Bios Default Write to Read delay Bios Default Read to Write Delay Bios Default Refresh Period tREF Bios Default Enable 2T Timing Disabled Then test the system with http://www.memtest.org and make sure it's stable! If you have problems, I would set Enable 2T Timings to AUTO and test it again! Link to comment Share on other sites More sharing options...
guitarmech111 Posted February 28, 2005 Author Share Posted February 28, 2005 How long am I supposed to let memtest run? It has already passed 2 successful tests. Please try and load setup defaults and then set these settings manually. Dim Voltage to +2.7 Volts: CAS Latency CL=2.5 Row Cycle Time tRC Bios Default Row Refresh Cyc Time tRFC Bios Default Ras# to CAS# delay tRCD 3 Row to Row delay Bios Default Min Ras# Active Time tRAS 6 Row Precharge Time tRP 3 Write Recovery Time Bios Default Write to Read delay Bios Default Read to Write Delay Bios Default Refresh Period tREF Bios Default Enable 2T Timing Disabled Then test the system with http://www.memtest.org and make sure it's stable! If you have problems, I would set Enable 2T Timings to AUTO and test it again! Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 28, 2005 Corsair Employees Share Posted February 28, 2005 2 or 3 passes should be enough to show if you have a problem. Link to comment Share on other sites More sharing options...
guitarmech111 Posted February 28, 2005 Author Share Posted February 28, 2005 2 or 3 passes should be enough to show if you have a problem. Thanks! I appreciate your help. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted March 1, 2005 Corsair Employees Share Posted March 1, 2005 You are quite welcome. Please let me know if you have any more questions! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.