muratdinc Posted November 26, 2018 Share Posted November 26, 2018 I bought LNP and installed it, I am having enough trouble. I've seen too many people living this problem. What are the consequences? What should I do? Video: [ame]https://www.youtube.com/watch?v=UhK1uS7ulPY[/ame] Video 2: [ame]https://www.youtube.com/watch?v=BH30_fyzTuM[/ame] Cables: [ame]https://www.youtube.com/watch?v=6rDGxafjD0w[/ame] Firmware v.0.7.122 Software versiyon 3.9.93 Note: No problem with the strip, it's working properly. Link to comment Share on other sites More sharing options...
DevBiker Posted November 26, 2018 Share Posted November 26, 2018 Try adding one more fan to the channel than you actually have - that seems to have helped some. Otherwise, it's entirely possible that you have a bad fan - either #1 or #2. As the fans operate in a series, even if a fan appears good, it may not pass the signal on properly. Link to comment Share on other sites More sharing options...
muratdinc Posted November 26, 2018 Author Share Posted November 26, 2018 Try adding one more fan to the channel than you actually have - that seems to have helped some. Otherwise, it's entirely possible that you have a bad fan - either #1 or #2. As the fans operate in a series, even if a fan appears good, it may not pass the signal on properly. Unfortunately, I don't have another SP 120 fan and I don't think to buy another one. There must be some other way, I saw people who use this system without any problem with 3 fans. Link to comment Share on other sites More sharing options...
DevBiker Posted November 26, 2018 Share Posted November 26, 2018 Unfortunately, I don't have another SP 120 fan and I don't think to buy another one. There must be some other way, I saw people who use this system without any problem with 3 fans. Just add it as a 4th fan in iCUE not "for real". So a software-only fan. Another option is to rearrange the fans on the RGB Fan Hub. That'll tell us if it's due to a bad fan. Link to comment Share on other sites More sharing options...
muratdinc Posted November 26, 2018 Author Share Posted November 26, 2018 Just add it as a 4th fan in iCUE not "for real". So a software-only fan. Another option is to rearrange the fans on the RGB Fan Hub. That'll tell us if it's due to a bad fan. This is not: [ame]https://www.youtube.com/watch?v=j6udmLXJcFQ[/ame] Problem two fans: [ame]https://www.youtube.com/watch?v=SwgMXpRSlSI[/ame] What will happen now? Link to comment Share on other sites More sharing options...
DevBiker Posted November 26, 2018 Share Posted November 26, 2018 It does look like the issue is with 2 of the fans. At this point, your best option is likely an RMA ... so open a support ticket. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.