dboss Posted February 27, 2005 Share Posted February 27, 2005 system IC-MAX3 BIO Version: 18 P4 478 3.4EGHZ 800MHZ 1MB COSAIR TWINX2048-3200PRO WD 74GB/WD740GB 10,000 8MB SERIAL ATA (OS HARDRIVE) HITACHI DESKSTAR 7K400 400 MB 72,000 8MB SERIAL ATA (BACKUP) POWER SUPPLY COOLMAX550W CT55OEE WINDOWS XP PRO. (NOT INSTALLED YET!!) NVIDIA 9600 PRO What I have is a all new sytem. Nothing has been (Over Clock) When I turn on system it will sit at post for 6 min. then will continue on with no beeps no err messages..... I yet have not installed OS yet Till I fix this problem. CPU IS SET AT "BY CPU" and reads correct cpu operating speed 3400(200) *ext. clock (cpu/agp/pci) 200/66/33mhz *multiplier factor 17x *estimated new cpu clock "3.4ghz" *n/b strap cpu as "by cpu" *dram ratio (cpu:dram) "by spd" *agp ratio (cpu:agp:pci) "auto" *fixed agp/pci frequency "66/33mhz" cpu power supply "cpu default" *cpu core voltage "1.3875v" *ddr sdram voltage "2.6v" *agp voltage "1.55v" dram timing selectable "by spd" *cas latency time "3" *act to precharge delay "8" *dram ras# to cas# delay "3" *dram ras# precharge "3" dboss Link to comment Share on other sites More sharing options...
Wired Posted February 28, 2005 Share Posted February 28, 2005 Try one stick at a time in the same slot, see what happens, then try again in another slot. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.