Colin327 Posted February 26, 2005 Share Posted February 26, 2005 My motherboard is a gigabyte ga-k8nnxp socket 754, ive just bought 2x512mb xms4000 pro. I was unable to get both modules to work together when i first installed them. 1 module on its own would work fine but if i put the 2 in the system became unsatble, crashing all the time. I have since got them working together by going into the bios and setting the the cas/trcd/trpd/tras to 3-4-4-8 and the dimm voltage up to 2.78v. I was a little unsure :confused: of what i was doing and just thought i would check with you guys to see if these setting are ok to run with. Thanks Colin Link to comment Share on other sites More sharing options...
Wired Posted February 26, 2005 Share Posted February 26, 2005 Yes, the settings and voltage are correct. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.