joker16 Posted February 25, 2005 Share Posted February 25, 2005 Hi, I just upgraded today from 3200C2's, and just have a couple of questions (I plan on staying at default 400mhz, 2-2-2-5): 1) What would be optimal voltage? -I have an Intel D875PBZ motherboard, and I have the following choices: 2.625, 2.675, 2.725, & 2.775 - Also, what would be optimal if I had another motherboard with options like 2.65, 2.70, 2.75, 2.80? 2) Optimal command rate? 3) A) Memory Refresh Cycle Time? (Default is 12) B) Memory R/W delay? (Default is 2) C) Memory R/W timing? (Default is 6) I know it's not THAT much of an upgrade, but I did it mainly beause I plan to get an Athlon64 when the SSE3, 1MB cache cores come out, and didn't want to be stuck with a 2.5 timing :): Link to comment Share on other sites More sharing options...
CMC_SAVAGE Posted February 26, 2005 Share Posted February 26, 2005 You'd be safe (warranty) up to 2.9 volts. If they're running 2-2-2-5 at 400Mhz, I'd leave every thing alone. Command rate 1T. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.