egivens Posted February 25, 2005 Share Posted February 25, 2005 I have a shuttle and my system is very unstable. I have the recommended ram installed but I keep getting a general protection fault. I think the ram is the problem, how do I return? Thanks, Link to comment Share on other sites More sharing options...
Wired Posted February 25, 2005 Share Posted February 25, 2005 What CPU / FSB / Motherboard do you have? What part # / version # of memory do you have? If more than one, is it a TwinX pack? How To Read the Memory Label Link to comment Share on other sites More sharing options...
egivens Posted February 25, 2005 Author Share Posted February 25, 2005 I have a FS51 Mother board with a 2.0gig Celeron and 400/533 FSB. I have the recommended PC3200 512MB cl2.5.The systems seems to with fine for a few hours, then it locks up and I get the prtection fault message. Thanks for You Help! What CPU / FSB / Motherboard do you have? What part # / version # of memory do you have? If more than one, is it a TwinX pack? How To Read the Memory Label Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted February 25, 2005 Corsair Employee Share Posted February 25, 2005 How many modules do you have and what is the exact part# of both modules and can you tell me the bios settings you have set for both CPU and memory? Link to comment Share on other sites More sharing options...
egivens Posted February 25, 2005 Author Share Posted February 25, 2005 Ram Guy The part number is vs512mb400, which may be the problem. CAS latency is 2.5t , DRAM Add/cmd rate 2t, CPU:DRAM clock ratio 1:1, and CPU clock is 100. Thanks for Your Help, Link to comment Share on other sites More sharing options...
Corsair Employee RAM GUY Posted February 25, 2005 Corsair Employee Share Posted February 25, 2005 Please test the system with http://www.memtest.org and see if you get any errors. In addition when the system locks does it give you a BSOD message? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.