t_recneps Posted February 24, 2005 Share Posted February 24, 2005 I have 2 256mb modules. One module works fine with all memory timings, the other causes erratic behaviour and memtest 86 errors regardless of the timings. I have reseated the modules, swapped slots, and tried each module individually with the same results. Gigabyte GA-7VAX AMD Athlon XP 2500+ Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 24, 2005 Corsair Employees Share Posted February 24, 2005 Please try and set the Dim Over voltage control to +.2 Volts and then test the sustpect module with http://www.memtest.org. And if it passes please install them in slots 1-3 and test with both installed at Cass 2.5-3-3-7. Link to comment Share on other sites More sharing options...
t_recneps Posted February 24, 2005 Author Share Posted February 24, 2005 Please try and set the Dim Over voltage control to +.2 Volts and then test the sustpect module with http://www.memtest.org. And if it passes please install them in slots 1-3 and test with both installed at Cass 2.5-3-3-7. No luck.. it still fails.. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 24, 2005 Corsair Employees Share Posted February 24, 2005 Please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.