GRINDFEST Posted October 14, 2018 Share Posted October 14, 2018 Hello, I have a Corsair 760T and I was curious as to what the purpose of these circular holes were since they were not mentioned in the manual. Can they be removed by hand or would I need to use power tools? They seem like they can be used to route cables to the back of the case to me but I am not so sure about that. Thank you in advance. Link to comment Share on other sites More sharing options...
Corsair Employees Corsair Caliente Posted October 16, 2018 Corsair Employees Share Posted October 16, 2018 Looks like it was mainly used to lock your PC (tie it to something with a combination chain?). You could probably remove it with a good pair of wire cutters. Otherwise a poweer tool would be more efficient. Link to comment Share on other sites More sharing options...
Nonhinged Posted October 24, 2018 Share Posted October 24, 2018 They are for watercooling tubes for external radiators. The "X" is for ease of removal, stick a screwdriver in the hole and bend/twist until the discs snaps away. The hole lower down should be a Kensington security slot.(Padlock symbol with a K next to the hole) 1 Link to comment Share on other sites More sharing options...
Recommended Posts