Jump to content
Corsair Community

bad cmx512-xms3200cl2


paytonspop

Recommended Posts

module less than a year old. rig will not boot with it installed. placed a different module and rig boots fine. was working fine until a few days ago. nothing new or different added to rig. all drivers up to date. bad ram or something else?

 

asus a7n8x-e deluxe bios 1013

amd 2600 mobile

ultra x-connect 500w ps

2 80g diamond maxtor hdd striped

promise tx2000 raidcard

turtlebeach soundcard

Link to comment
Share on other sites

  • Corsair Employees

Please try with just our module installed and set the following settings and then test the modules with http://www.memtest.org.

CPU Freq: 166 MHz

System performance: User Define

Memory Frequency: 100%

Dim Voltage to 2.7 Volts

Resulting Frequency: 166MHz

SDRAM CAS Latency: 2.5T

SDRAM RAS to CAS Delay (tRCD): 3T

SDRAM Row Precharge (tRP): 3T

SDRAM Active to Precharge Delay (tRAS): 6T

Link to comment
Share on other sites

Please try with just our module installed and set the following settings and then test the modules with http://www.memtest.org.

CPU Freq: 166 MHz

System performance: User Define

Memory Frequency: 100%

Dim Voltage to 2.7 Volts

Resulting Frequency: 166MHz

SDRAM CAS Latency: 2.5T

SDRAM RAS to CAS Delay (tRCD): 3T

SDRAM Row Precharge (tRP): 3T

SDRAM Active to Precharge Delay (tRAS): 6T

 

made a floppy of the program. inserted the corsair ram. rig will not even boot to allow me to run test or even get into bios setup. made the bios changes with other ram installed and rig will not boot. post screen will not even come up. nothing happens on monitor.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...