jman79797 Posted October 3, 2018 Share Posted October 3, 2018 I have 4 LL120 fans, but only 2 light up. I cannot see them in the Corsair ICUE software, or in Link. They are all connected to the commander pro and lighting node pro which came with the case. There are 2 more Corsair fans on the top which came with the H100i V2 which are also connected to the commander node pro. Also ICUE only sees a 1000d case, which i don't have, and the RAM. Link to comment Share on other sites More sharing options...
DevBiker Posted October 6, 2018 Share Posted October 6, 2018 Can you please show a screen cap of your iCue configuration screen? Second, did you configure the lighting channel? iCue cannot auto-detect connected fans; you need to set up the lighting channel and tell iCue how many fans and of what type. Link to comment Share on other sites More sharing options...
jman79797 Posted October 6, 2018 Author Share Posted October 6, 2018 (edited) %E2%80%AAC%3A%5CUsers%5Cjackn%5CPictures%5CSaved%20Pictures%5CIcue.jpg I do not know how to set that up. I am completely new to the software, so ill try and look it up. EDIT: I found a video, i cant actually see the commander pro. The only devices I can see is the Vengeance RAM and a 1000d, Which i do not own Edited October 6, 2018 by jman79797 Link to comment Share on other sites More sharing options...
DevBiker Posted October 6, 2018 Share Posted October 6, 2018 First, your image isn't visible except on your machine. If you want to embed it, then you need to post it on a cloud file share; you can embed from there. I don't have a C:\Users\Jackn folder. Second, you can look at my iCue for the Link User videos linked in my signature. The 1000D should be the Commander Pro - the 1000D comes with a Commander Pro. It would seem that you may have the wrong firmware in there and that's an issue to take up with Corsair support. I'm trying to get to your LL fans, which should still work and, as the 1000D is actually a commander pro, you can use the configuration for that. Link to comment Share on other sites More sharing options...
jman79797 Posted October 6, 2018 Author Share Posted October 6, 2018 (edited) Ok, SO i watched your videos which greatly helped! The only problem is that when I create a lighting channel and add 4 LL fans, only 2 light up. 1 seems to be controlled through the RAM and the other doesn't ever light up. I know the LEDs work as i saw them on when I first booted the pc. I have 2 more non RGB fans which came with my H100i V2 cooler. Maybe they're doing something? I have 2 slots where i can plug those fans in which are connected directly to the cooler, but at the moment I connected them to the commander pro. Should I change that? Edit: The reason I could control the top fan through the RAM interface was because I used Lighting Link effects Edited October 6, 2018 by jman79797 Link to comment Share on other sites More sharing options...
DevBiker Posted October 6, 2018 Share Posted October 6, 2018 If Lighting Link is affecting the fan, then the effects that you have on the channel aren't being applied to the fans. Apply an effect, select it and then highlight all of the fans that show in the channel. Still waiting for that screen cap. Link to comment Share on other sites More sharing options...
jman79797 Posted October 6, 2018 Author Share Posted October 6, 2018 I don't know why my lighting node pro (not the commander) and my H100i V2 aren't showing up either... Link to comment Share on other sites More sharing options...
Recommended Posts