drawesome Posted September 2, 2018 Share Posted September 2, 2018 I have a solid red light on my commader pro no fans are spinning nor the rgb light that are plugged into the lighting node that is plugge dinto the command center everything is plugged in correctly I have plugged the fans into a header and the fans spin icue and corsair link do not recognize my devices please advise Link to comment Share on other sites More sharing options...
DevBiker Posted September 2, 2018 Share Posted September 2, 2018 That's not right ... it sounds like it's stuck in bootloader mode. Take a look at this video about how to reset the firmware (don't delete the existing firmware though).[ame] [/ame] Link to comment Share on other sites More sharing options...
drawesome Posted September 2, 2018 Author Share Posted September 2, 2018 in icue and corsair link there the devices are not showing up so their is no way for me to even look at her firmware in side those software programs the lighting node is plugged into the command center pro my command center pro has a solid red light on it and I don't know what it means my fans are not spinning because of the red light and my rgbs are not working either nor are my rgb strips Link to comment Share on other sites More sharing options...
DevBiker Posted September 2, 2018 Share Posted September 2, 2018 The red light most likely means that it's stuck in bootloader mode. Do you see a CRP DISABLED drive on your machine? If so, eject the drive. Then unplug the USB and replug it. Also ... it doesn't hurt to double-check the USB connection. It's easy to have it off-by-one pin. Link to comment Share on other sites More sharing options...
drawesome Posted September 3, 2018 Author Share Posted September 3, 2018 The red light most likely means that it's stuck in bootloader mode. Do you see a CRP DISABLED drive on your machine? If so, eject the drive. Then unplug the USB and replug it. Also ... it doesn't hurt to double-check the USB connection. It's easy to have it off-by-one pin. unfortunately I do not know what a CRP drive is or where inside my machine it would be Link to comment Share on other sites More sharing options...
DevBiker Posted September 3, 2018 Share Posted September 3, 2018 unfortunately I do not know what a CRP drive is or where inside my machine it would be It would appear in file explorer. Just like in the video that I linked to. If that's not there then it's likely that something is completely kerfluffled with the Commander Pro. In that case, return to the vendor (if you are in the window) or create a support ticket. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.