Ladrogue Posted August 15, 2018 Share Posted August 15, 2018 dear all... yesterday i shut down my device after windows update. i was wondering cause my led where effecting red and green. normally its completely off when i shut down my computer. today i started it but my led wont let me control them. i received an update for icue but now the node is not detected... if my computer is in use the fans are white the omega stripe is in rainbow colors without a moving effect. if i turn it of the fans are orange. i am really confused... yesterday all worked fine. i also tried to reset it while i am removed the cable of the psu but the light stay on? wothout connected power für 15 mins or more? is that normal? Link to comment Share on other sites More sharing options...
DevBiker Posted August 15, 2018 Share Posted August 15, 2018 The lighting shouldn't be on when the power is off. It is concerning that your PSU would still provide power on the SATA connection when powered down; there's really no other way that this could happen. As for not being detected ... can you check in USBDeView (https://www.nirsoft.net/utils/usb_devices_view.html)? Corsair's Vendor ID is 1b1c ... so see what devices are detected by Windows. We have seen Windows Updates blow away the drivers and a reinstall of iCue usually fixes this. Link to comment Share on other sites More sharing options...
Ladrogue Posted August 15, 2018 Author Share Posted August 15, 2018 hey biker, i disconnected all sata cables and connected them aain now its working again... but if i shut down my light bar and my 3 fans are light up green and red... i dont know why... if u wanna see check my dropbox link https://www.dropbox.com/s/zzj8c0rdbcq1aky/VID_20180815_124310.mp4?dl=0 Link to comment Share on other sites More sharing options...
Ladrogue Posted August 15, 2018 Author Share Posted August 15, 2018 USBDeView is listing the device by the way Link to comment Share on other sites More sharing options...
DevBiker Posted August 15, 2018 Share Posted August 15, 2018 That video was with the power off? I notice that the fans aren't spinning. I have to wonder why your PSU is supplying 5V power when shut down. Can you fill out your system specs? Link to comment Share on other sites More sharing options...
Ladrogue Posted August 15, 2018 Author Share Posted August 15, 2018 done :). this ligning is since the update yesterday. before it was off Link to comment Share on other sites More sharing options...
DevBiker Posted August 15, 2018 Share Posted August 15, 2018 What happens if you unplug the PSU completely? Link to comment Share on other sites More sharing options...
Ladrogue Posted August 15, 2018 Author Share Posted August 15, 2018 i tried this tomorrow... the light stays on... even the mainboard ligts and led strip connected to board... waited around 15 mins still on. but the fans where orange then Link to comment Share on other sites More sharing options...
Ladrogue Posted August 15, 2018 Author Share Posted August 15, 2018 i diconnected the psu from my wall plug completely Link to comment Share on other sites More sharing options...
Ladrogue Posted August 15, 2018 Author Share Posted August 15, 2018 i know then led somethimes are on without power source for a view seconds... but 15 mins??? i was a bit scared Link to comment Share on other sites More sharing options...
DevBiker Posted August 15, 2018 Share Posted August 15, 2018 On Power Off, modern PSUs have a +5V standby going to the motherboard. This won't be there if you unplug from the wall completely. Do you have anything from the Spec Alpha plugged into the motherboard? That 5V Standby really should only be on the 24-pin motherboard connector, not on the SATA connector. I have to think that there is something going truly wacky with your PSU. Link to comment Share on other sites More sharing options...
Ladrogue Posted August 15, 2018 Author Share Posted August 15, 2018 maybe the usb charge when off function? but only the sata power is connected to the spec omega node... and the fact that the lights stay on without any connection to the wall plug is really confusing xD Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.