londonmark69 Posted February 20, 2005 Share Posted February 20, 2005 ...................Hi, Thanks in advance for any help/advice. I have an ASUS A8N-SLI DELUXE, with an FX-53 and 2 Nvidia 6800 Ultra's along with my trusty Corsair TWINX 4000 PRO (1 GIG MATCHED PAIR) and a 600w ENERMAX psu with a 24 pin connector not an adaptor. Anyway that set up works fine no probs, then i have a brainwave that as most of the time im NOT overclocking i'l get a pair of TWINX 3200XLPT 's as reccomended by this sites module finder.Having installed them i press the power button and get.............................Nothing, a blank screen, my hard drives spin, all is lit up motherboard wise, but no POST,in fact no nothing on the monitor? Any ideas? Many thanks. Regards, Mark. Link to comment Share on other sites More sharing options...
londonmark69 Posted February 21, 2005 Author Share Posted February 21, 2005 ..........for all the help Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted February 22, 2005 Corsair Employees Share Posted February 22, 2005 Please try and clear the bios with the new modules installed and then set the voltage to 2.8 Volts after you load setup defaults. And you cannot mix these modules. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.