Krokarn Posted August 7, 2018 Share Posted August 7, 2018 I bought a Obsidian 500D RGB SE and a H150i PRO. I uses my old motherboard from yhe old case. I have a Commander PRO, 2 Led-hubs and 9 LL fans. 6 LL120 fans on the H150i PRO, 1 LL120 in the rear and 2 LL140 in the top. My problem is that the H150i PRO is NOT showing up in iCUE. I have tried to uninstall iCUE and reinstalled. I have tried different USB ports on both CoPRO and motherboard. I have NOT Corsair USBXp driver in Device manager. I have checked in "usbdeviev" and the H150i PRO is NOT showing. I have checked "disable fast startup, turn on XHCI Hand Off and Legacy USB support" in bios. What will i do now? Link to comment Share on other sites More sharing options...
Krokarn Posted August 7, 2018 Author Share Posted August 7, 2018 It is getting Power from sata, i can hear the pump and the fans are spinning. Link to comment Share on other sites More sharing options...
DevBiker Posted August 7, 2018 Share Posted August 7, 2018 Have you tried using a standard microUSB cable to route it to an external USB port? Link to comment Share on other sites More sharing options...
Corsair Employees Corsair Lettuce Posted August 7, 2018 Corsair Employees Share Posted August 7, 2018 Does "CorsairUSBXp Driver" appear within the device manager? By chance are you running any other RGB controlling software besides iCUE? Link to comment Share on other sites More sharing options...
Krokarn Posted August 7, 2018 Author Share Posted August 7, 2018 Have you tried using a standard microUSB cable to route it to an external USB port? Yes, i hope it is a Cable for data and not only for charging. Link to comment Share on other sites More sharing options...
Krokarn Posted August 7, 2018 Author Share Posted August 7, 2018 Does "CorsairUSBXp Driver" appear within the device manager? By chance are you running any other RGB controlling software besides iCUE? No, no Corsair USBXp Driver in device manager. No other RGB controlling software. Link to comment Share on other sites More sharing options...
Krokarn Posted August 7, 2018 Author Share Posted August 7, 2018 I remember now when i started the PC to test if all is in function i heard a strage noice from the pump, like a flash or a spark...maybe my pump is finished...more or less dead. Link to comment Share on other sites More sharing options...
DevBiker Posted August 7, 2018 Share Posted August 7, 2018 I remember now when i started the PC to test if all is in function i heard a strage noice from the pump, like a flash or a spark...maybe my pump is finished...more or less dead. Unfortunately, that's what it's beginning to sound like. :( Hit the "Support Ticket System" link at the top ... Link to comment Share on other sites More sharing options...
Krokarn Posted August 7, 2018 Author Share Posted August 7, 2018 Unfortunately, that's what it's beginning to sound like. :( Hit the "Support Ticket System" link at the top ... Yes, have made a ticket. Also contacted the shop were i bought it from here in Sweden, se what they will do. Link to comment Share on other sites More sharing options...
Krokarn Posted August 8, 2018 Author Share Posted August 8, 2018 Have already got answer from my shop, getting a new one. But for the moment, out of stock... :/ Link to comment Share on other sites More sharing options...
Krokarn Posted August 30, 2018 Author Share Posted August 30, 2018 Today i got a new H150i, mounted it and now it shows up in iCUE :) But, now another problem, my Node PRO is gone. I will check some cables and return if it still is missing. Link to comment Share on other sites More sharing options...
Corsair Employees Corsair Jam Posted August 30, 2018 Corsair Employees Share Posted August 30, 2018 Today i got a new H150i, mounted it and now it shows up in iCUE :) But, now another problem, my Node PRO is gone. I will check some cables and return if it still is missing. Great to hear! You may need to run a repair on iCue, if everything is looking good on the cabling. Link to comment Share on other sites More sharing options...
Krokarn Posted August 30, 2018 Author Share Posted August 30, 2018 Great to hear! You may need to run a repair on iCue, if everything is looking good on the cabling. Pulled out the usb-cable from the motherboard and mounted it again, now it shows up in iCUE again. All devices shows up now in iCUE! :) Case Closed :D Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.